Please note. If you are ordering our banners to fit an existing metalwork system that is not one of ours, we will need you to supply the measurements of the existing banners. Overall width x height (including any pockets) and also if one or two pockets and the depth of the pocket(s). Please enter the measurements in the Special Instructions box alternatively email email@example.com please include your order number.
The Canvas banners are made from Marine Acrylic Canvas to make sure only the best quality finish is achieved. As it is marine canvas it is ideal for outdoor use.
The canvas fabric is cleanable with soap and water and with a range of 26 colours we are sure to have a material to suit your needs.All our acrylic fabrics have been impregnated with TEFLON ®. This creates a barrier effect and reinforces the water repellence of the fabric. Furthermore, it delays the adherence of soil onto the fabric.
The graphics for these banners are individually heat stamped on and once applied will create a premium finish that makes your barriers standout from the crowd like nothing else can.
Canvas Technical Specification
UNSURPASSABLE COLOUR STABILITY.
HIGH RESISTANCE TO LIGHT AND ATMOSPHERIC CONDITIONS.
MAXIMUM EFFICIENCY AGAINST PUTREFYING AGENTS
RESISTANCE TO SHRINK.
MAXIMUM RESISTANCE TO TEARING DUE TO STRETCHING.
MAXIMUM RESISTANCE TO ATMOSPHERIC POLLUTION.
EASILY THERMOFORMABLE WITH SIMPLE WORKSHOP TOOLS.
PERMITS PASSAGE OF AIR.
Fabrics made from acrylic fibres offer excellent qualities of stability, water resistance and breathability and against U.V light. All our acrylic fabrics have been impregnated with TEFLON ®. This creates a barrier effect and reinforces the water repellency of the fabric. Furthermore, it delays the adherence of soil onto the fabric.
We use only the highest quality materials to ensure that you receive a quality product that will last a very long time.
We dont just print your logo on the banner material like other companies. We use a special process of colour seperation on your logo and each colour is cut out of an actual coloured heat press material and applied using a special technique.
The sample shown is the Hard Rock Cafe, the logo was sent by the customer, this was then recreated as a vectorized graphic and then colour seperated by our design team which is shown in the diagram to the right and each colour is then cut out of the relevant heat press material colour and then the colours are carefully applied on to the canvas banner material and then heat pressed onto the material with special equipment.
This gives a fantastic finish that will exude quality and also is very hard waering and with stand up to the elements. the artwork materials used are fade resistant and will still look fantastic as time passes.
The Finished Hard Rock Cafe Barrier Below
The Canvas Cafe Barrier Personalisation Process
If You Would like To Speak To Us Regarding Your Own Requirements Please Contact Us Now 01422 884065, We Will Be More Than Happy To Help.
YOU SEND US A FILE READY TO PRINT If you already have a designer , can design it yourself or have existing artwork then simply follow our artwork instructions. Any questions please call our design studio on 01422 884065
Important Artwork Notes:
1) Positional proof – This proof is usually a laser or inkjet run off which we can only use for positional accuracy. Positional proofs cannot be used for colour matching.
2) Colour matching. If you send a match print or other hard copy printed material (i.e. letterhead, brochure) we will check your file prior to printing. If we cannot achieve# a reasonable match we will call you to discuss. It is not always possible to match pantone colours using CMYK printers. Our printers and media are carefully calibrated but if no colour proof is provided we can only print what is supplied on disk.
Please Note: We will create proofs using (where possible) colours requested by you or from artwork supplied by you, the proof is a visual representation of the colour and we cannot guarantee that the finished product will be exactly the same colour. We also cannot control the settings of the screen or device that you are viewing the proof on – which will have an impact on the colour. If you require a colour matching service, this can be offered, please get in touch to discuss.
3) Please make sure that the artwork files you send match our specification. We cannot be held responsible for errors that occur resulting form artwork supplied that does not meet our specification and reserve the right to charge for any remedial work prior to printing. Correct artwork means no additional charges or time delays.
HOW TO PREPARE YOUR ARTWORK We can handle artwork from the following software packages: Adobe Indesign, Adobe Illustrator, Adobe Photoshop & Corel Draw
If you are supplying artwork not created in one of the listed software packages please output your files as an EPS or Press Ready/High resolution Pdf
Supply all fonts used or outline text before saving.
Please supply all original files along with any imported scans, logos, fonts etc. Supply a laser proof with all files, marked up with sizes, scales, fonts, software used and any other relevant information. Please work to whole scales i.e. 1:2, 1:4, 1:10 etc.
For help and advice please call us and speak to the design department 01442 884065
IN HOUSE DESIGN STUDIO
We are more than happy to produce the artwork for you, please contact us for prices and more information on 01422 884065
Step 1 – Click Café Barrier Metalwork, Select the Metal work that you want and enter the quantities of the posts and cross beams and click add to cart.
Step 2 – Click Café Banner Material Options, choose the banner material that you prefer, enter the choices on banner colour, banner size, then choose whether you want plain or branded and the amount of colours. Enter the colour references ( you can see the colour swatches on the product page) Choose your quantity, then add the banners to your cart.
Step 3 – All done just click on the checkout link or click the basket in the top right of the menu and finish your purchase.